Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.
FormFutura STYX-12 Filament - White, 2.85 mm, 50 g
8718924479803
New product
STYX-12 is an industrial PA12 grade nylon filament that combines excellent mechanical, chemical and hygroscopic properties with printability.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
This product is no longer in stock
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
Unique features
- Superb mechanical properties
- Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
- Excellent chemical resistance
- Excellent weather and UV resistance
- Outstanding dimensional stability
- Good first layer adhesion to EasyPad + DimaFix prepared a print bed
- Very clear in its natural form (without added colorants)
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100 - 110% |
| Print temp: ± 240 - 270oC | Print speed: Low / Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 80 - 120oC | Fan speed: 0-30% | Experience level: Intermediate / Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| p: 1.02 g/cc | 50 gr coil | 0.5 Kg spool |
| Ø 1.75mm | ± 20.4m | ± 204m |
| Ø 2.85mm | ± 7.7m | ± 77m |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.02 g/cc | ISO 1183 | - |
| Melt flow rate | - | - | - |
| Water absorption | - | - | - |
| Moisture absorption | - | - | - |
| Mechanical | |||
| Impact strength | 14 KJ/m2 | ISO 179 | Charpy Notched @23oC (73oF) |
| Tensile strength | 60.0 Mpa | ISO 527 -1/-2 | @Yield |
| Tensile modulus | 1400 Mpa | ISO 527 | - |
| Elongation at break | >150% | ISO 527 -1/-2 | 0 |
| Flexural strength | - | - | - |
| Flexural modulus | - | - | - |
| Hardness | 81 | ISO 868 | Shore D Hardness |
| Thermal | |||
| Print temperature | ± 240 - 270oC | - | - |
| Melting temperature | ± 250 ± 10oC | ISO 11357 | - |
| Viscat softening temp. | ± 105oC | ISO 868 | 264psi annealed |
| Optical | |||
| Haze | - | - | - |
| Transmittance | - | - | - |
| Gloss | - | - | - |