Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura ReForm rTitan Filament - Off-White, 2.85 mm, 1000 g
8718924470510
New product
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
The ideology behind ReForm is to make 3D printing more sustainable - without having to make compromises on material properties - and yet keep it affordable. ReForm rTitan is based on exactly the same unique formulation as our TitanX filament range but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and FDM/FFF-optimized upcycled TitanX-based filament with significantly less environmental impact.
Unique features
- 100% upcycled/recycled filament with retaining the unsurpassed printing properties of TitanX
- Less environmental impact by quality controlling and re-using extrusion waste streams
- Only residual waste streams of TitanX is being re-used, thus pure quality!
- Sustainable packaging
- ReForm filaments are spooled on easy to recycle and dispose of recycled cardboard spools
- ReForm filament is packaged in recycled carton boxes
- FDM/FFF-optimized
- Warp-free printing
- Optimized filament flowing behavior and inter-layer adhesion
- Excellent adhesion to the heated glass plate, Kapton tape, PET tape, and Formfutura EasyPad
- Greatly improved mechanical properties, strength, and impact resistance
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 106% |
| Print temp: ± 240 - 265oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 80 - 90oC | Fan speed: 0-30% | Experience level: Beginner/Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| p: 1.10 g/cc | 50 gr coil | 1 Kg spool |
| Ø 1.75mm | ± 18.9m | ± 378m |
| Ø 2.85mm | ± 7.1m | ± 143m |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.10 g/cc | ISO 1183 | - |
| Melt flow rate | 41 g/10min | ISO 1183 | 260oC/5Kg |
| Water absorption | - | - | - |
| Moisture absorption | - | - | - |
| Mechanical | |||
| Impact strength | 58 KJ/m2 | ISO 179 | Charpy Notched @23oC (73oF) |
| Tensile strength | 43.6 Mpa | ISO 527 | @Yield 50mm/min (2 inch/min) |
| Tensile modulus | 2030 Mpa | ISO 527 | 1mm/min |
| Elongation at break | 34% | ISO 527 | @ Break 50mm/min (2 inch/min) |
| Flexural strength | - | - | - |
| Flexural modulus | - | - | - |
| Hardness | - | - | - |
| Thermal | |||
| Print temperature | ± 240 - 260oC | - | - |
| Melting temperature | ± 235 ± 10oC | ISO 294 | - |
| Viscat softening temp. | ± 97oC | ISO 306 | VST/A/50 (50oC/h, 10N) |
| Optical | |||
| Haze | - | - | - |
| Transmittance | - | - | - |
| Gloss | - | - | - |