Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura Premium ABS Filament - Frosty White, 2.85 mm, 2300 g
8718924473146
New product
Premium ABS has a great thermal stability and flowing behavior, which is essential for 3D printing.
See description for more details about the product.
Add to cart now!
This product is no longer in stock
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant. Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping.
Unique features
• Great process stability and filament flowing behaviour
• No-nonsense ABS
• Easy to post-process
• Good physical features
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 220 - 270oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110oC | Fan speed: 0-30% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.03 g/cc | 50 gr coil | 1 Kg spool | 2.3 Kg spool |
| Ø 1.75mm | ± 20.2m | ± 404m | ± 928m |
| Ø 2.85mm | ± 7.6m | ± 152m | ± 350m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance*
This filament is compliant to below-listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.03 g/cc | ISO 1183 | - |
| Melt flow rate | 5.5 cm3/10min | ISO 1133 | 220oC/10Kg |
| Water absorption | 1.04% | ISO 62 | Saturated at 23oC |
| Moisture absorption | 0.23% | ISO 62 | Equilibrium 23oC/50% RH |
| Mechanical | |||
| Impact strength | 29 KJ/m2 | ISO 180/A | Izod Notched @23oC (73oF) |
| Tensile strength | 36 Mpa | ISO 527 | Stress @ Yield 23oC |
| Tensile modulus | 1860 Mpa | ISO 527 | - |
| Elongation at break | 9% | ISO 527 | Nominal Strain at Break, 23oC |
| Flexural strength | ± 65.7 Mpa | - | - |
| Flexural modulus | ± 2148 Mpa | - | - |
| Hardness | 71 Mpa | ISO 2039-1 | Ball Indentation Hardness |
| Thermal | |||
| Print temperature | ± 220 - 270oC | - | - |
| Melting temperature | ± 145 ± 10oC | ISO 294 | - |
| Viscat softening temp. | ± 92oC | ISO 306 | VST/A/50 (50oC/h, 10N) |