Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura Pegasus PP Ultralight Filament - Natural, 2.85 mm, 500 g
8718924470664
New product
Pegasus PP Ultralight is most likely the lightest filament in the world!
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
Pegasus PP Ultralight is a nanotechnology enhanced compound based on our Centaur PP plus other PP grades and various impact modifiers and binding agents. Due to the nanotechnology applied Pegasus PP Ultralight has a 20% lower weight and/or density than regular PP. Pegasus PP Ultralight combines all the mechanical properties of PP with an extremely lightweight and that makes it a very suitable material for applications such as automotive, drones, floating applications, wear-resistant & durable applications, etc…
Unique features
- Extremely lightweight
- Material density of 0.75 g/cc
- 20% lighter than average PP
- 40% lighter than average PLA
- Material density of 0.75 g/cc
- Good wear-, abrasion-, and fatigue resistance
- High chemical resistance
- Does not absorb moisture
- Excellent interlayer adhesion
- Excellent adhesion to Eurocel LDPE Tape (PE 920)
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height:≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 215 - 245oC | Print Speed: Medium / High | Retraction: Yes ± 5mm |
| Heat bed: ± 0 - 100oC | Fan Speed: 50 - 100% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Pegasus PP Ultralight prints can be printed on an unheated 2mm or 3mm PP plate, which can be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
| p: 0.75 g/cc | 50 gr coil | 0.5 Kg spool |
| Ø 1.75mm | ± 27.7m | ± 277m |
| Ø 2.85mm | ± 10.5m | ± 105m |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 0.75 g/cc | ISO 1183 | - |
| Melt flow rate | 230oC / 2,16kg | ISO 1133 | 6,2 g/10min |
| Water absorption | - | - | - |
| Moisture absorption | - | - | - |
| Mechanical | |||
| Impact strength | 3.56 KJ/m2 | ISO 179 | Charpy Notched @23oC (73oF) |
| Tensile strength | 12Mpa | ISO 527 | @Yield 50mm/min (2 inch/min) |
| Tensile modulus | 605 Mpa | ISO 527 | - |
| Elongation at break | 25% | ISO 527 | - |
| Flexural strength | - | - | - |
| Flexural modulus | - | - | - |
| Hardness | - | - | - |
| Thermal | |||
| Print temperature | ± 215 - 245oC | - | - |
| Melting temperature | ± 154oC | - | - |
| Viscat softening temp. | - | - | - |