Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000080905
New product
ABS filament. Manufactured in Spain and highly impact-resistant.
Recommended temperature: 220º-245ºC.
Diameter variability: +/- 0.03mm.
Compatible with all FDM printers.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
ABS is a copolymerization of styrene, acrylonitrile, and butadiene latex. Its heat and solvent resistance properties are better than HIPS and it has gloss characteristics. Because acrylonitrile has stronger nitrile polarity, it can enhance the interaction of the PS in the molecular chain. Therefore, its impact strength, tensile strength, and plastic surface hardness are better compared to those of HIPS.
Generally, the higher the content proportion of acrylonitrile, the better the heat resistance, rigidity, and solvent resistance properties; but the fluidity is worse and the plastic contains a yellow colour. During injection mode, it has very good mechanical property and dimensional stability. Based on these advantages, the ABS resin has become an excellent engineering plastic.
Our ABS-E, based on the PA-747R from CHIMEI, is easier to print, less prone to warping and cracking and with improved impact resistance and material stress. Thanks to the experience gained in the creation of materials and the close collaboration with manufacturers of 3D printers and makers around the world, CHIMEY has achieved an ABS capable to withstand higher speeds and better adhesion accuracy between layers.
PROPERTIES | ASTM TEST METHOD |
TEST CONDITION | UNIT | GENERAL |
PA-757 | ||||
Melt Flow Index | D1238 | 200 ℃, 5 Kg | g/10 min | 1.6 |
220 ℃, 10 Kg | - | |||
Mass Density | D792 | 23 ℃ | - | 1.05 |
Hardness | D785 | - | R Scale | 116 |
Tensile Strength (Yield) | D638 | 6 mm/min | Kg/cm2 | 470 |
lb/in2 | 6660 | |||
Tensile Elongation | D638 | 6 mm/min | % | 25 |
Flexural Strength | D790 | 2.8 mm/min | Kg/cm2 | 790 |
lb/in2 | 11660 | |||
Flexural Modulus | D790 | 2.8 mm/min | 104 Kg/cm2 |
2.7 |
105 lb/in2 |
3.8 | |||
Izod Impact Strength | D256 (Notched) |
6.4 mm, 23℃ | Kg-cm/cm | 20 |
ft-lb/in | 3.7 | |||
3.2 mm, 23℃ | Kg-cm/cm | 21 | ||
ft-lb/in | 3.9 | |||
Vicat Softening Temp | D1525 | 1 Kg,50 ℃/hr | ℃ | 105 |
℉ | 221 | |||
Heat Distortion Temp. | D648 | 1.8 MPa Annealed | ℃ | 95 |
℉ | 203 | |||
1.8 MPa Unannealed |
℃ | 85 | ||
℉ | 186 | |||
UL Flammability | UL 94 | - | - | 1.5 mm HB |
This NEMA 17HS4401 bipolar stepper motor has a...
$8.16
You can easily print with this PLA filament and...
$16.80
You can easily print with this PLA filament and...
$16.80
ASA is a printing material similar to ABS, but...
$21.12
T8 Nuts and Damping Spring (8mm diameter, 2mm...
$2.57
You can easily print with this PLA filament and...
$16.80
M3 Sliding T Nut for 20 mm V-Slot Profiles
$0.29
PETG is a non-toxic, clear and durable printing...
$22.56
You can easily print with this PLA filament and...
$16.80
ASA is a printing material similar to ABS, but...
$28.08