Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura ClearScent ABS Filament - Red, 2.85 mm, 50 g
8718924474570
New product
CleasScent ABS (methylmethacrylate acrylonitrile butadiene styrene) combines good mechanical properties and translucency into a 3D printer filament that is easy to process with limited warping and limited styrene smell. ClearScent ABS exhibits resistance to various chemicals and complies with UL 94 HB flammability standards.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
This product is no longer in stock
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
ClearScent ABS is an extremely printer friendly Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene type of 3D printer filament which is transparent in its original form and doesn’t produce any unpleasant odors when being 3D printed.
Besides its transparency and odorless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behavior is fine-tuned for optimal 3D printing results.
Key features
- Transparent ABS filament
- 90% light transmittance with 2.2% haze
- UL 94 HB flammability rating
- Good chemical resistance
- Limited warping and styrene smell when being 3D printed
- Compatible with Helios Support for complex multi-extrusion 3D printing
- Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents
Applications
• Household tools
• Electronic goods
• Frames and panels
• Custom components
• Custom components
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100% |
| Print temp: ± 220 - 260oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 100oC | Fan speed: 0-30% | Experience level: Beginner |
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 106 g/cc | 50 gr coil | 0.75 Kg spool |
| Ø 1.75mm | ± 19.6m | ± 196m |
| Ø 2.85mm | ± 7.4m | ± 74m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.06 g/cc | ASTM D792 | - |
| Melt flow rate | 12.0 g/10min | ASTM D1238 | 220oC/10Kg |
| Water absorption | - | - | - |
| Moisture absorption | - | - | - |
| Mechanical | |||
| Impact strength | 17 KJ/m2 | ISO 180/A | Izod Notched @23oC (73oF) |
| Tensile strength | 39.2 Mpa | ASTM D638 | @Yield 50mm/min (2 inch/min) |
| Tensile modulus | ± 1900 Mpa | - | - |
| Elongation at break | 35% | ASTM D638 | @ Break 50mm/min (2 inch/min) |
| Flexural strength | 60.8 Mpa | ASTM D790 | 15mm/min |
| Flexural modulus | 1833 Mpa | ASTM D790 | 15mm/min |
| Hardness | 100 | ASTM D785 | Rockwell R-scale |
| Thermal | |||
| Print temperature | ± 220 - 260oC | - | - |
| Melting temperature | - | - | - |
| Viscat softening temp. | ± 82oC | ASTM D648 | 6.4mm, 18.6Kg (Unannealed) |
| Optical | |||
| Haze | 2.2% | ASTM D1003 | - |
| Transmittance | 90% | ASTM D1003 | - |
| Gloss | - | - | - |