Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura ABSPro Filament - White, 2.85 mm, 50 g
8718924473665
New product
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament - which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) - resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.
Unique features
• Extremely strong and impact resistant
• Extremely high printing precision
• High gloss
• Good chemical resistance
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.02 g/cc | ISO 1183 | - |
| Melt flow rate | 5.5 cm3/10min | ISO 1133 | 220oC/10Kg |
| Water absorption | 1.02% | ISO 62 | Saturated at 23oC |
| Moisture absorption | 0.19% | ISO 62 | Equilibrium 23oC/50% RH |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Mechanical | |||
| Impact strength | 39 KJ/m2 | ISO 180/A | Izod Notched @23oC (73oF) |
| Tensile strength | 39.9 Mpa | ISO 527 | Stress @ Yield 23oC |
| Tensile modulus | 2100 Mpa | ISO 527 | - |
| Elongation at break | 11% | ISO 527 | Nominal Strean at Break, 23oC |
| Flexural strength | ± 72.7 Mpa | - | - |
| Flexural modulus | ± 2370 Mpa | - | - |
| Hardness | 77 Mpa | ISO 2039-1 | Ball Indentation Hardness |
General printing guidelines
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 106% |
|---|---|---|
| Print temp: ± 245 - 275oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 100 - 120oC | Fan speed: 0-30% | Experience level: Expert |
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
* Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.
Compliance
This filament is compliant to below listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC