Devil Design TPU Filament - Red Flexible 1 kg, 1.75 mm

Description

TPU filament - thermoplastic polyurethane in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. The use of filament in printers with a Bowden type extruder (with a filament guide tube) may be impossible or very difficult. TPU is a material with high chemical resistance, including oils and greases. Printouts from TPU are characterized by high flexibility and very good bonding of layers.

Physical properties of the product

Diameter of filament	1.75 mm / 2.85 mm
Dimensional tolerance of filament	+/- 0.05 mm
Roundness of filament	+/- 0.02 mm
Surface of the material	Light Gloss
Shrinkage of the material	Low
Product weight	1.0 kg net, 1.36 kg gross
Spool - material	Transparent polycarbonate
Weight of the empty spool	~250 g
The diameter of the spool	200 mm
Width of spool	~70 mm
Diameter of mounting hole	52 mm
Packaging	Printed cardboard
Package size	~205x205x80 mm
Vacuum packing	Yes
Moisture absorber	Yes

Suggested printing parameters

Hotend	210-230oC
Heated bed	20-80oC
Cooling the printout	Recommended

Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally

Don't delay. Buy today.

Add to cart now!