Plusivo Micro WiFi Development Board with ESP8266 and CH340G (resealed, faulty)

Technical Specifications

• Equipped with ESP8266
• Flash memory: 32 MB
• Driver serial: CH340G
• Power plug: micro USB
• Supply voltage: 5 V - 9 V DC
• 9 digital pins
• 3 3.3V outputs
• Functions: PWM, ADC
• Communication protocols: SPI, I2C

Instructions for use

The Plusivo Micro development board is not included in the Arduino IDE development environment, so you need to add it to yourself. This is done as follows:

1. Open Arduino IDE.
2. Go to  FILE> PREFERENCES.
3. Copy the following link to "Additional Boards Manager URLs":  http://arduino.esp8266.com/stable/package_esp8266com_index.json
4. Open  TOOLS> BOARDS> BOARDS MANAGER. 
5. Download and install  ESP8266.
6. Restart the Arduino IDE.

IMPORTANT!!! If your operating system is Windows or MAC OS, you need to install the driver that is attached to the bottom of the page.

You now have to select the plaque. Plusivo MIcro is compatible with  NodeMCU V1.0 (ESP12-E).  Open the TOOLS > BOARD tab and select NodeMCU V1.0 (ESP12-E).  

The configuration settings are as follows:

• CPU Frequency: 80 MHz;
• Flash Size: 4 M (1 M SPIFFS);
• Upload Size: 921600

To test the development board functionality, you can upload an example. To choose one, go to  FILE> EXAMPLES   and choose a general one such as  BLINK  or one for  ESP8266 , such as  ESP8266WIFI> WiFi SCAN.

Don't delay, buy today.

Add to cart now!