Sale!

FormFutura ReForm rTitan Filament - Off-White, 2.85 mm, 50 g

View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

FormFutura ReForm rTitan Filament - Off-White, 2.85 mm, 50 g

Reference: 8718924470534

Condition: New product

ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments.

See Description for more details about the product.

Don't delay, buy today. Add to cart now!

More details

This product is no longer in stock

Notify me when available

Write a review

Remove this product from my favorite's list.

Add this product to my list of favorites.

More info

Description

The ideology behind ReForm is to make 3D printing more sustainable - without having to make compromises on material properties - and yet keep it affordable. ReForm rTitan is based on exactly the same unique formulation as our TitanX filament range but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and FDM/FFF-optimized upcycled TitanX-based filament with significantly less environmental impact.

Unique features

100% upcycled/recycled filament with retaining the unsurpassed printing properties of TitanX
- Less environmental impact by quality controlling and re-using extrusion waste streams
- Only residual waste streams of TitanX is being re-used, thus pure quality!
Sustainable packaging
- ReForm filaments are spooled on easy to recycle and dispose of recycled cardboard spools
- ReForm filament is packaged in recycled carton boxes
FDM/FFF-optimized
- Warp-free printing
- Optimized filament flowing behavior and inter-layer adhesion
- Excellent adhesion to the heated glass plate, Kapton tape, PET tape, and Formfutura EasyPad
Greatly improved mechanical properties, strength, and impact resistance

General printing guidelines *

Nozzle size: ≥ 0.15mm	Layer height: ≥ 0.1mm	Flow rate: ± 106%
Print temp: ± 240 - 265^oC	Print speed: Medium	Retraction: Yes ± 5mm
Heat bed: ± 80 - 90^oC	Fan speed: 0-30%	Experience level: Beginner/Intermediate

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

p: 1.10 g/cc	50 gr coil	1 Kg spool
Ø 1.75mm	± 18.9m	± 378m
Ø 2.85mm	± 7.1m	± 143m

Properties	Typical value	Test Method	Test condition
Physical
Specific gravity	1.10 g/cc	ISO 1183	-
Melt flow rate	41 g/10min	ISO 1183	260^oC/5Kg
Water absorption	-	-	-
Moisture absorption	-	-	-
Mechanical
Impact strength	58 KJ/m²	ISO 179	Charpy Notched @23^oC (73^oF)
Tensile strength	43.6 Mpa	ISO 527	@Yield 50mm/min (2 inch/min)
Tensile modulus	2030 Mpa	ISO 527	1mm/min
Elongation at break	34%	ISO 527	@ Break 50mm/min (2 inch/min)
Flexural strength	-	-	-
Flexural modulus	-	-	-
Hardness	-	-	-
Thermal
Print temperature	± 240 - 260^oC	-	-
Melting temperature	± 235 ± 10^oC	ISO 294	-
Viscat softening temp.	± 97^oC	ISO 306	VST/A/50 (50^oC/h, 10N)
Optical
Haze	-	-	-
Transmittance	-	-	-
Gloss	-	-	-