3" LCD for Raspberry Pi 3

Un raport bun pret/performanta, controler ili9488, 400x240 pixel

Pt Raspbian Jessie:
-se creeaza /etc/modules-load.d/fbtft.conf
ce contine:
"spi-bcm2835
flexfb
fbtft_device"
-se creeaza /etc/modprobe.d/fbtft.conf
ce contine:
options fbtft_device name=flexpfb rotate=180 fps=60 gpios=dc:18,reset:7,wr:17,cs:4,db00:22,db01:23,db02:24,db03:10,db04:25,db05:9,db06:11,db07:8
options flexfb width=400 height=240 buswidth=8 init=-1,0xb0,0x0,-1,0x11,-2,120,-1,0x3A,0x55,-1,0xC2,0x33,-1,0xC5,0x00,0x1E,0x80,-1,0x36,0x28,-1,0xB1,0xB0,-1,0xE0,0x00,0x04,0x0E,0x08,0x17,0x0A,0x40,0x79,0x4D,0x07,0x0E,0x0A,0x1A,0x1D,0x0F,-1,0xE1,0x00,0x1B,0x1F,0x02,0x10,0x05,0x32,0x34,0x43,0x02,0x0A,0x09,0x33,0x37,0x0F,-1,0x11,-1,0x29,-3
-In /boot/cmdline.txt se adauga:
fbcon=map:10 fbcon=font:VGA8x8 FRAMEBUFFER=/dev/fb1 inainte de rootwait

Pt xserver/gui:
-se instaleaza pachetul xserver-xorg-video-fbdev
- se creeaza /usr/share/X11/xorg.conf.d/99-fbdev.conf ce contine:
Section "Device"
Identifier "myfb"
Driver "fbdev"
Option "fbdev" "/dev/fb1"
EndSection

Apoi reboot

• 22 out of 26 people found this review useful.