Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura Platinum LCD Series - Solid Black, 500 g
8719956551901
New product
The Formfutura Platinum LCD Resin Series is our range of general-purpose photopolymer LCD resin, which is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Product Description
The Formfutura Platinum LCD Resin Series is our range of general-purpose photopolymer LCD resin, which is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm. Our Platinum LCD resin is almost odourless and allows you to 3D print objects with extremely high accuracy and relatively short curing times.
Unique features
• Almost no odour - Compared to other resins on the market our Platinum LCD resin is relatively odour-free!
• UV & weather resistant
• Fast printing with short curing times
• High accuracy
• Vivid colours with an extremely high level of colour fastness
○ Truly opaque and translucent colours available
○ No discolouration and/or yellowing
• Low shrinkage
• Compatible with all open source LCD and DLP in the range of 385 - 420nm
Resin properties (uncured liquid)
• Viscosity: 500 cps at 25oC
• Density: 1.18 g/cm2
Mechanical properties
Test method on post cured objects through 30 minutes high power LED curing
| Properties | Typical Value | Test Method |
| Glass transition temperature (Tg) | 51oC | ASTM D7028 |
| Water absorption | 0.4% | ASTM D570-98 |
| Impact strength (IZOD notched) | 18 J/m | ASTM D256A |
| Tensile strength | 45 MPa | ASTM D638M |
| Tensile Modulus | 1.0 GPa | ASTM D638M |
| Elongation at break | 8% | ASTM D638M |
| Flexural Strength | 66 MPa | ASTM D790M |
| Flexural Modulus | 1.8 GPa | ASTM D2240 |
| Shore D Hardness | 82 | ASTM D2240 |
Preparation(s) before starting to print
• Shake the bottle for at least 2 minutes before each use.
• After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
○ The resin can be poured back from the vat into the bottle once your print is finished
• Always use protective measurements like safety glasses and nitrile gloves when handling resins.
General printing guidelines
Base Curing Times at 50 micron
• Translucent Black: 12sec
• Translucent Aquamarine: 10sec
• Translucent Blue: 12sec
• Translucent Red: 11sec
• Solid White: 12sec
• Solid Black: 14sec
• Solid Light Grey: 13sec
Post-processing
• We do advise you to post-process your 3D print in order to achieve the material properties.
○ Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
• An ultrasonic cleaner is preferred/recommended.
○ Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing.
• Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
○ Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
• The preferred curing wavelength is between 300-410nm.
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
1. Always wear Respiratory Protection when sanding/cutting the resin object.
2. Always use nitrile gloves when handling resins and uncured resin objects.