PrimaValue PLA Filament - 1.75mm - 1 kg Spool - Silver

PrimaValue PLA is a tough, easy to use high grade PLA type of filament, ideal for 3D printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Due to a low shrinkage factor PLA will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing.

Performance: 

• PrimaValue is a very good filament for everyday use
• High strenght
• Almost warp free
• Good interlayer adhesion
• Good toughness

High quality: 

• Only high quality materials are used to produce PrimaValue
• Perfect roundness and very tight diameter tolerance
• Strict quality control and extensive testing

Practical: 

• Filament from PrimaValue is compatible with nearly all 3D printers on the market today
• Big spool diameter for smoother unwinding
• Heated build platform not required (recommanded with ABS)

Economical: 

• Higher quality results in less waste
• Large production volumes gives you a lower price
• No excessive heat results in lower print costs
• Full 1 kilogram is approximately 335 meter of filament on each spool

Easy of use: 

• No heated platform is required (recommanded with ABS)
• PrimaValue has very smooth flow characteristics
• Filament for PrimaValue is compatible with nearly all 3D printers on the market today

Features: 

• Tougher and less brittle compared to regular PLA
  
• Easy toprint at low temperature
• Low warping
• Biodegradable
• Limited smell

Dimensions: 

• Size: 1.75 mm
• Tolerance: ±0.05 mm
• Roundness: ± 95%

Physical properties: 

• Specific gravity has typical value of 1.24 g/cc, with ASTM D1505 testmethod 
• MFI has typical value of 6.0 G/ 10 min
• Tensile strenght has typical value of 10MPa (MD)/  145 MPa (TD), using ASTM D882 testmethod
• Elongation at break is 160% (MD)/ 100% (TD), using  ASTM D882 testmethod
• Tensile modulus is 310 MPa (MD)/ 3860 Mpa (TD), using  ASTM D882 testmethod
• Impact strenght is 7.5 KJ/ m²

Thermal properties: 

• Printing temperature: 180 - 210ºC
• Melting temperature:  210ºC ± 10ºC
• Melting point: 145 - 160ºC
• Vicat softening temperature is ± 60ºC, according ISO306

Additional informations: 

Due to its low tendency to warp PLA can also be printed without a heated bed. If you have a heated bed the recommended temperature is  ±35 - 60ºC. PLA can be used on all common desktop FDM or FFF technology 3D printers.

Storage:

We recommand you store the filament with the provided packet of silica gel. Store in a cool and dry place, with temperatures between 15 - 25ºC and keep away from UV light. 

Don't delay, buy today.

Add to cart now!