18650 XTAR MC1 Battery Charger

Product Description

The small package is hidden in the fully professional processor charger with a three-step process of loading the TC / CC /CV. Loading cell Li-ion 3.6 / 3.7V of any capacity sizes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26,650th

What is the charging method TC / CC / CV? It is a three-step process of charging Li-ion cells to maintain in good condition by loading the appropriate shock at every stage and completion of the loading process at the right time.

The individual process steps TC / CC / CV is:

• Phase TC cells are discharged under 2,9V "wakes" lower current.

• phase CC Upon reaching 2,9V cell is loaded with a constant current 0.5A.

• Phase CV: when the cell is almost charged the charger switches to the descending charge current until the cell voltage 4.2V. After reaching 4.2 V charging process has been completed - the battery is fully charged.

Batteries with a voltage of 4,1V or higher are considered by the loader as charged. To recharge the battery fully insert it into the charger before turning on the power. Left in the charger charged batteries they will undergo the natural process of self-discharge. Charging is resumed when the battery voltage drops below 4,1V.

Charger Xtar MC1. It has the function of reactivation of deeply discharged cells and cells with a voltage of 0V. Many chargers on the market are not able to recharge these batteries. Here comes to the aid Charger Xtar MC1, which in many cases allows for 'retrieval' of such cells. Simply insert a deeply discharged battery charger MC1, as the normal charging - charger detects a discharged cell and attempts to reactivate.

Warning! Cells discharged below a certain level are irreversibly damaged and reactivation may not be possible. Avoid too deep discharge Li-ion battery - can lead to a significant reduction in their stability and capacity or have a total failure.

Telescopic from other manufacturers can significantly raise the temperature of cells in the battery during charging. Excessive heating of the cells can cause them to wear faster. When designing a charger MC1, Xtar company went a step further than the competition, solving the problem in a simple way: uses an external power supply. As a result, the temperature of the battery loaded in the MC1 will increase by up to 15 degrees.

Complete with charger Xtar MC1 get a micro USB charger and a protective cover for transport. The kit is not included AC adapter. Enough to power any charger Charger with Micro USB cable, for example. From the phone, or a USB or PC with a free USB port. The recommended minimum power charger is 0.5A (500mA).

Specifications

• Charger Model: MC1

• Supported types of batteries: Li-ion 3.6 - 3.7 V, secured and unsecured

• Size Battery operated: 0440, 14500, 14650, 16340, 17500,17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650

• Maximum length of the battery: 70mm

• Input voltage and input current: 5V 500mA

• Power socket: micro USB

• Adapter included: NO

• Recommended power supply: minimum 5V 0.5A, recommended 5V 0.75

• Charging method: Processor-controlled TC / CC / CV

• Charging current phase CC: 500mA ± 50mA

• Connection end load: 4,2V ±0,05V

• Current termination: <40mA

• Additional features: reactivation of deeply discharged cells and cells 0V

• Security: Thermal, short circuit, before inserting a battery in reverse

• Dimensions: 92 x 22 x 26mm

• Weight: 20g

Don't delay, buy today.

Add to cart now!