Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura MetalFil - Ancient Bronze Filament - Natural, 2.85 mm, 750 g
8718924477137
New product
MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29oC.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
MagicFil's anthracite grey color will change into a natural PLA color when the material reaches a temperature of 29oC or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end "easy to use" impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behavior and interlayer adhesion make it extremely easy to print filament.
Unique features
- Colour changing ability from anthracite grey to natural PLA at 29oC
- Anthracite grey colour < 29oC > natural PLA colour
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behavior and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Slightly softer than standard PLA resulting in improved strength and impact resistance
- Almost odorless processing/printing
- Biodegradable
General printing guidelines*
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 100% |
| Print temp: ± 200 - 230oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 0 - 60oC | Fan speed: 50-100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.24 g/cc | 50 gr coil | 0.5 Kg spool |
| Ø 1.75mm | ± 16.8m | ± 168m |
| Ø 2.85mm | ± 6.3m | ± 63m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance*
This filament is compliant with the below-listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
MagicFilTM Thermo PLA is an "easy to use" high-end PLA (Poly-Lactic Acid ) type of 3D printer filament, which is slightly modified with an impact modifier, making the filament tougher, less rigid, slightly softer and therefore "easy to print" at relatively low temperatures. MagicFilTM Thermo PLA is nearly warp-free and will not deform after cooling. As its name implies, MagicFilTM Thermo PLA has a unique and remarkable thermochromic feature as the filament, or printed object will change from color at a temperature of 29oC.
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.24 g/cc | ASTM D1505 | - |
| Melt flow rate | 6.0 g/10min | - | - |
| Water absorption | - | - | - |
| Moisture absorption | - | - | - |
| Mechanical | |||
| Impact strength | 7.5 KJ/m2 | - | - |
| Tensile strength | 110 Mpa (MD) | ASTM D882 | - |
| Tensile modulus | 3310 Mpa (MD) | ASTM D882 | - |
| Elongation at break | 160% (MD) | ASTM D882 | - |
| Flexural strength | ± 55.2 Mpa | - | - |
| Flexural modulus | ± 2392.5 Mpa | - | - |
| Hardness | - | - | - |
| Thermal | |||
| Print temperature | ± 180 - 220oC | - | - |
| Melting temperature | ± 210 ± 10oC | - | - |
| Viscat softening temp. | ± 60oC | ISO 306 | - |
| Optical | |||
| Haze | 2.1% | ASTM D1003 | - |
| Transmittance | - | - | - |
| Gloss | 90 | ASTM D1003 | Gloss, 20o |