Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura Matt PLA Filament - Stealth White, 2.85 mm, 750 g
8719956551635
New product
Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.
Unique features
- Good surface quality
- Rough and matt surface finish with fine detail
- Easy to print at high printing speeds
- Warp-free printing and improved flowing behavior
- Excellent first layer adhesion to several (un)heated print surfaces
- Compatible with AquaSolve PVA
- ide variety of matt PLA colors
Applications
• Household tools
• Architectural mock-ups
• Complex educational projects and models
• Concept models
• Manufacturing and visualization aids
Abbrassiveness
Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend using hardened steel nozzles when 3D printing with Matt PLA.
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.10mm | Experience level: Beginner |
| Print temp: ± 215 - 230oC | Fan Speed: 50 - 100% | |
| Heat bed: ± 0 - 60oC | Enclosure needed: No |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| p: 1.24 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| Ø 1.75mm | ± 15.1m | ± 226m | ± 693m | ± 1356m | ± 2410m |
| Ø 2.85mm | ± 5.7m | ± 85m | ± 261m | ± 511m | ± 909m |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.38 g/cc | ISO 1183 | - |
| Melt flow rate | 14 g/10min | ISO 1133 | 210oC/2,16Kg |
| Mechanical | |||
| Impact strength | ±3.0 KJ/m2 | - | - |
| Tensile strength | 46 Mpa (MD) | ISO 527 | @ yield |
| Tensile modulus | 3973 Mpa | ISO 527 | - |
| Thermal | |||
| Print temperature | ± 215 - 235oC | - | - |
| Melting temperature | - | - | - |
| Viscat softening temp. | ± 57oC | - | - |