Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000085214
New product
1.3inch OLED (B)
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
DRIVER CHIP | SH1106 |
INTERFACE | 3-wire SPI, 4-wire SPI, I2C |
RESOLUTION | 128*64 |
DISPLAY SIZE | 1.3inch |
COLORS | Blue |
VISIBLE ANGLE | >160o |
OPERATING TEMP. (oC) | -30~70 |
STORAGE TEMP. (oC) | -30~80 |
OPERATING VOLTAGE | 3.3V / 5V |
APPLICABILITY | Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
PIN NO. | SYMBOL | DESCRIPTION |
1 | VCC | Power positive (3.3~5V power input) |
2 | GND | Ground |
3 | NC | NC |
4 | DIN | Data input |
5 | CLK | Clock signal input |
6 | CS | Chip selection, low active |
7 | D/C | Command signal, low level for command, high level for data |
8 | RES | Reset signal, low active |
MODE/INTERFACE | BS0/BS1 | DIN | SCK |
3-wire SPI | 1/0 | MOSI | SCLK |
4-wire SPI | 0/0 | ||
I2C | 0/1 | SDA | SCL |
The 1.3inch OLED provides 2 options for the onboard pinheader:
Weight: 0.008 kg
Test Wiring 50 x 70 mm See description for...
2,49 lei
Relay mode with a channel suitable for...
4,99 lei
15 cm 10p Male-Male Wires See description for...
3,99 lei
Test Wiring 70 x 90 mm See description for...
3,79 lei
This 10 x 20 mm Towline is engineering nylon...
34,99 lei
KCD10-101 Switch See description for more...
1,99 lei
This is a camera compatible with any version of...
149,99 lei
Product type: DC power jack connector...
1,49 lei
The HC-SR04 ultrasonic sensor is one of the...
6,49 lei
296x128, 2.9inch E-Ink display module See...
119,99 lei