Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
700461242703
New product
With WiFi, BLE and cellular LTE CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today - the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.
See description for more details about the product.
Add to cart now!
5 Item Items
Warning: Last items in stock!
Availability date:
Note: The LTE Antenna MUST always be used with LTE CAT M1 / NB1, or it could cause serious damage to the development board.
Get on with a board that gets you into the newly available LTE-M networks. The GPy gives you full flexibility during testing, install, deployment and is delivered RCM, IC, CE and FCC certified.
With WiFi, BLE and cellular LTE CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.
Tx/Rx Frequencies:
Ports for LTE Bands |
Tx frequencies | Rx frequencies |
Low bands 5, 8, 12, 13, 18, 19, 20, 28 | 699 to 915 MHz | 729 to 960 MHz |
Mid bands 1, 2, 3, 4 | 1710 to 1980MHz | 1805 to 2170 MHz |
LTE-M Operating Frequencies: 34 bands supported from 699Mhz to 2170Mhz (Total world-wide support)
LTE-M Specification:
– One single chip for both CAT M1 and NB1
– 3GPP release 13 LTE Advanced Pro
– Supports narrowband LTE UE categories M1/NB1
– Integrated baseband, RF, RAM memory and power management
– Reduced Tx power class option
– Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
– Data rates:
– 300kbps DL
– 375 kbps UL (LTE Cat M1 in 1.4Mhz in 1.4 Mhz, HD-FDD)
– 40 kbps DL
– 55kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)
Interfaces:
– 2 x UART, 2 x SPI, I2C, I2S micro SD card
– Analog channels: 8×12 bit ADCs, 2×8 bit DAC
– Timers: 2×64 bit with PWM with up to 16 channels
– DMA on all peripherals
Power:
– Voltage Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA
Processing:
– Espressif ESP32 SoC
– Dual processor + WiFi radio system on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Security & Certifications:
– SSL/TLS support up to 1.2
– WPA Enterprise security
– AES encryption engine
Memory:
– RAM: 4MB
– Flash Memory: 8MB
– GPIO: Up to 22
– Hardware floating point acceleration
– Python multi-threading
Hash / Encryption:
SHA, MD5, DES, AES
WiFi Networking:
802.11b/g/n 16mbps
Bluetooth:
Low energy and classic
RTC: Running at 32KHz
Size:
55mm x 20mm x 3.5mm (Without Headers)
Weight:
– 7g
– 31g
White Plastic Case (90 x 70 x 28 mm)
5,99 lei
This is battery holder with 3 chambers for R6...
3,95 lei
This 5110c-compatible LCD is a display based on...
21,99 lei
NodeMCU is an open source IoT platform. It...
18,99 lei
Raspberry Pi HDMI-HDMI Black Cable 1 m
21,99 lei
This high quality 830 point breadboard is made...
9,98 lei
The SIM808 combines a GSM / GPRS module with...
199,99 lei
Ideal wires for making connections between...
7,73 lei
3 x R3 Battery Case See description for more...
7,49 lei
Kit Arduino Sensors - 37 in 1
148,99 lei