Spectrum PLA Glitter Filament - Stardust Blue 1.75 mm 1 kg

Spectrum PLA Glitter is a PLA-based material blended with high-glitter particles. The particle content in the filament increases the hardness and compression resistance of printed items. These properties are improved at the cost of the higher brittleness of items. Due to the content of infusible particles, it is necessary to use printing nozzles with diameters of 0.4mm or more. Otherwise, the material does not differ from pure PLA and may be processed at the same temperatures as the classic PLA.

With the above-mentioned properties, the applications of Spectrum PLA Satin are mostly oriented towards decorative art and interior design, where the aesthetic qualities prevail, while the 3D print-specific artifacts have maximally reduced visibility.

Glitter PLA advantage

• a good alternative for styrene-based materials
• printing possible without a heated bed
• easy separation of the object from the bed
• high durability comparable to ABS prints
• no shrinkage after cooling
• the possibility to obtain a perfect side surface

Elements produced using Spectrum PLA Glitter are characterized by:

Improved hardness and compression resistance as compared to PLA without admixtures
High brittleness
High-gloss surfaces, which reduces the visibility of layers on the side face of the printed items
The possibility to control the gloss level by increasing/decreasing the wall thickness.

Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

General information

Physical & thermal properties of basic material

Don't delay. Buy today.

Add to cart now!