Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura Galaxy PLA Filament - Space Grey, 2.85 mm, 50 g
8719956550713
New product
Galaxy PLA is a deep metallic colored PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminum-flakes added.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
The high added aluminum-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminum-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle color shadings and radiance. Even though its high silver-aluminum-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.
Unique features
- Extremely glittering & shimmering surface finish
- 3D print objects without visible layers
- Not abrasive to the nozzle of 3D printers
- Incredibly deep-colored 3D printer filament
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behavior and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: > 0.1mm | Flow rate: ± 100% |
| Print temp: ± 210 - 235oC | Print speed: Medium | Retraction: Yes ± 1.5 - 3mm |
| Heat bed: ± 0 - 60oC | Fan Speed: 50 - 100% | Printing surface: Blue Tape / Glass |
| Enclosed printer needed: No | Heated Build Chamber: No | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| p: 1.24 g/cc | 50 gr coil | 0.75 Kg spool |
| Ø 1.75mm | ± 16.8m | ± 251m |
| Ø 2.85mm | ± 6.3m | ± 95m |
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.24 g/cc | ISO 1183 | - |
| Melt flow rate | 9.56 g/10min | ISO 1133 | - |
| Water absorption | - | - | - |
| Moisture absorption | 1968 ppm | ISO 62 | - |
| Mechanical | |||
| Impact strength | 3.4 KJ/m2 | ISO 179 | Charpy Notched @23oC (73oF) |
| Tensile strength | 70 Mpa (MD) | ISO 527 | @ yield |
| Tensile modulus | 3120 Mpa | ISO 527 | - |
| Elongation at break | 0,2 | ISO 527 | - |
| Flexural strength | - | - | - |
| Flexural modulus | - | - | - |
| Hardness | - | - | - |
| Thermal | |||
| Print temperature | ± 200 - 230oC | - | - |
| Melting temperature | ± 115 ± 35oC | ISO 11357 | - |
| Viscat softening temp. | ± 60oC | ISO 306 | - |
| Optical | |||
| Haze | - | - | - |
| Transmittance | - | - | - |
| Gloss | - | - | - |