Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura FlexiFil Sample Pack (2.85 mm)
0104110000081391
New product
FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a "flexural memory", allowing objects to return back to their original position or shape after being bent, dent, or folded.
See description for more details about the product.
Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
This FlexiFil Sample Pack contains the following samples (50g each):
- FlexiFil - Black
- FlexiFil - Blue
- FlexiFil - Natural
- FlexiFil - Red
- FlexiFil - White
FlexiFil has unique flexural strength properties, as 3D printed objects with FlexiFil will have a "flexural memory", allowing objects to return back to their original position or shape after being bent, dent, or folded. Next to this FlexiFil offers a unique combination of flexibility, long term heat resistance, strength, excellent UV resistance and good resistance to chemicals.
Unique features
- Very flexible filament with "flexural memory"
- Shore hardness of 45D
- High impact resistance
- No deformation or breaks when stressed by bending
- Strong & durable
- Good resistance to chemicals
- Excellent UV resistance
- IEC 60695-11-10 Flammability classification: HB
- 43% renewable bio-based content
General printing guidelines
| Nozzle size:≥ 0.15mm | Layer height:≥ 0.1mm | Flow rate:± 100% |
| Print temp:± 220 - 260oC | Print speed: Low | Retraction:Yes ± 5mm |
| Heat bed:± 90 - 110oC | Fan speed: 50-100% | Experience level:Intermediate / Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.14 g/cc | 50 gr coil | 0.5 Kg spool |
| Ø 1.75mm | ± 18.2m | ± 182m |
| Ø 2.85mm | ± 6.9m | ± 69m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance
This filament is compliant with the below-listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.14 g/cc | ISO 1183 | - |
| Melt flow rate | 39 cm3/10min | ISO 1133 | 230oC/2.16Kg |
| Water absorption | ± 0.69% | - | Saturated at 23oC |
| Moisture absorption | ± 0.30% | - | Equilibrium 23oC/50% RH |
| Mechanical | |||
| Impact strength | No Break | ISO 180/1A | Izod Notched @23oC (73oF) |
| Tensile strength | 24 Mpa | ISO 527 -1/-2 | Stress @ Break |
| Tensile modulus | 95 Mpa | ISO 527 -1/-2 | - |
| Elongation at break | 530% | ISO 527 -1/-2 | Nominal Strain at Break, 23oC |
| Flexural strength | - | - | - |
| Flexural modulus | - | - | - |
| Hardness | 45D | ISO 868 | Shore D Hardness (3s) |
| Thermal | |||
| Print temperature | ± 220 - 260oC | - | - |
| Melting temperature | ± 180 | ISO 11357-1/-3 | 10oC/min |
| Viscat softening temp. | ± 90oC | ISO 306 | VST/A/50 (50oC/h, 10N) |