FormFutura Arnitel® Filament ID 2060-HT - Black, 1.75 mm, 50 g

Description

Arnitel® ID2060 HT is the first high performance TPC FFF material combining flexibility with prolonged high temperature use as well as chemical resistance and strength. This combination makes it suitable to print cold charge air ducts for demanding automotive under the hood applications as well as components for end-of-arm tooling. Parts printed can resist sustained high-temperature of 175°C (1000 hrs) or 190°C (500 hrs) and chemicals such as EGR condensate.

Possible applications

• Air-fuel management systems, engine shields for automotive
• Gaskets and seals for automotive
• Aluminium & rubber replacement for light weighting applications in automotive under the hood
• Gaskets and seals for automotive
• Tubes for home appliances

Key Benefits & Properties

• First high temperature TPC filament on the market
• A unique balance of flexibility, sustained high temperature and chemical resistance
• Prolonged high temperature performance: 175°C (1000 hrs), 190°C (500 hrs)
• Excellent chemical resistance against EGR condensates
• Hardness of Shore D 61

General printing guidelines *

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) First layer : 100 - 150% of first layer thickness.

*) Print speed: 20 - 50 mm/s (obeying the maximal throughput in cm3/s of the extruder)

*) Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.

Filament length

Storage and conditioning

Arnitel® ID 2060-HT grades are supplied in airtight, moisture-proof packaging at a moisture level <0.05 w="" p="">

In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged. For the same reason, partially used bags should be sealed before re-storage. Allow the material that has been stored elsewhere to adapt to the temperature in the processing room while keeping the bag closed. To prevent moisture condensing on filaments, bring cold filaments up to ambient temperature in the print shop while keeping the packaging closed.

DSM Plastics Finder

For more technical information and guidelines please visit DSM Plastics Finder.

Compliance *

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Specifications

Don't delay. Buy today.

Add to cart now!