FormFutura EasyWood Filament - Coconut, 2.85 mm, 500 g

Description

EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature

Unique features

• Extremely high wood-filling of 40%

• Real wood feel, look and smell

• Very easy to print

• Warp-free printing and no deformation after cooling

• Great thermal stability and filament flowing behaviour

• Perfect first- and inter-layer adhesion

• Can be printed at high printing speeds

• Create wood-nerve structures

• By postprocessing the printed object with a piece of fine grit sandpaper

• By varying with the print/extrusion temperature

• Biodegradable

General printing guidelines

*)Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

Product export information

Compliance

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC

• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

EasyWood^TM looks, feels and smells like real wood. EasyWood^TM is a unique mixture of 40% grinded wood particles in combination with the modified and proven easy-to-print binding polymers used for our EasyFil^TM PLA filaments. This extraordinary blend has resulted in a high-end and unsurpassed "easy to print" wooden filament. You can obtain a beautiful wood-nerve structure in your EasyWood^TM printed objects by grinding it a little bit with a piece of fine grit sandpaper. By grinding your printed object a bit you will highlight the relief, or rough edges/surfaces, of your printed object with different shades of the respective wood colour.

Don't delay, buy today.

Add to cart now!