Sale!

FormFutura EasyFil ABS Filament - Brown, 2.85 mm, 50 g

View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

FormFutura EasyFil ABS Filament - Brown, 2.85 mm, 50 g

Reference: 8718924473788

Condition: New product

EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.

See Description for more details about the product.

Don't delay, buy today. Add to cart now!

More details

This product is no longer in stock

Notify me when available

Write a review

Remove this product from my favorite's list.

Add this product to my list of favorites.

More info

Description

EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.

Unique features

• Superb process stability and limited warping

• Significant higher impact resistance than average ABS

• Very strong and durable

• Light-weight

• Viscat softening temperature of ± 103^oC

• Wide variety of vivid opaque colors

General printing guidelines *

Nozzle size: ≥ 0.15mm	Layer height: ≥ 0.1mm	Flow rate: ± 104%
Print temp: ± 225 - 270^oC	Print speed: Medium	Retraction: Yes ± 5mm
Heat bed: ± 90 - 110^oC	Fan speed: 0-30%	Experience level: Intermediate

* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.03 g/cc	50 gr coil	0.75 Kg spool	2.3 Kg spool
Ø 1.75mm	± 20.2m	± 303m	± 928m
Ø 2.85mm	± 7.6m	± 114m	± 350m

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC

• REACH directive 1907/2006/EC

* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

EasyFil^TM ABS is an "easy to use" high-end ABS (Acrylonitrile Butadiene Styrene) type of 3D printer filament. Because of its superb process stability and physical features, EasyFil^TM ABS cannot be compared to regular ABS. EasyFil^TM ABS is light and durable, has a very high impact-resistance, is extra strong, and above all is "easy to print" because of its limited warping.

Properties	Typical value	Test Method	Test condition
Physical
Specific gravity	1.03 g/cc	ISO 1183	-
Melt flow rate	5.5 cm³/10min	ISO 1133	220^oC/10Kg
Water absorption	1.03%	ISO 62	Saturated at 23^oC
Moisture absorption	0.21%	ISO 62	Equilibrium 23^oC/50% RH
Mechanical
Impact strength	36 KJ/m²	ISO 180/A	Izod Notched @23^oC (73^oF)
Tensile strength	38 Mpa	ISO 527	Stress @ Yield 23^oC
Tensile modulus	1900 Mpa	ISO 527	-
Elongation at break	9%	ISO 527	Nominal Strean at Break, 23^oC
Flexural strength	± 68.7 Mpa	-	-
Flexural modulus	± 2250 Mpa	-	-
Hardness	74 Mpa	ISO 2039-1	Ball Indentation Hardness
Thermal
Print temperature	± 220 - 270^oC	-	-
Melting temperature	± 145 ± 10^oC	ISO 294	-
Viscat softening temp.	± 103^oC	ISO 306	VST/A/50 (50^oC/h, 10N)