Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura EasyFil ABS Filament - Bronze, 2.85 mm, 50 g
8718924473849
New product
EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
Unique features
• Superb process stability and limited warping
• Significant higher impact resistance than average ABS
• Very strong and durable
• Light-weight
• Viscat softening temperature of ± 103oC
• Wide variety of vivid opaque colors
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 225 - 270oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110oC | Fan speed: 0-30% | Experience level: Intermediate |
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.03 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | ||
| Ø 1.75mm | ± 20.2m | ± 303m | ± 928m | ||
| Ø 2.85mm | ± 7.6m | ± 114m | ± 350m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
EasyFilTM ABS is an "easy to use" high-end ABS (Acrylonitrile Butadiene Styrene) type of 3D printer filament. Because of its superb process stability and physical features, EasyFilTM ABS cannot be compared to regular ABS. EasyFilTM ABS is light and durable, has a very high impact-resistance, is extra strong, and above all is "easy to print" because of its limited warping.
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.03 g/cc | ISO 1183 | - |
| Melt flow rate | 5.5 cm3/10min | ISO 1133 | 220oC/10Kg |
| Water absorption | 1.03% | ISO 62 | Saturated at 23oC |
| Moisture absorption | 0.21% | ISO 62 | Equilibrium 23oC/50% RH |
| Mechanical | |||
| Impact strength | 36 KJ/m2 | ISO 180/A | Izod Notched @23oC (73oF) |
| Tensile strength | 38 Mpa | ISO 527 | Stress @ Yield 23oC |
| Tensile modulus | 1900 Mpa | ISO 527 | - |
| Elongation at break | 9% | ISO 527 | Nominal Strean at Break, 23oC |
| Flexural strength | ± 68.7 Mpa | - | - |
| Flexural modulus | ± 2250 Mpa | - | - |
| Hardness | 74 Mpa | ISO 2039-1 | Ball Indentation Hardness |
| Thermal | |||
| Print temperature | ± 220 - 270oC | - | - |
| Melting temperature | ± 145 ± 10oC | ISO 294 | - |
| Viscat softening temp. | ± 103oC | ISO 306 | VST/A/50 (50oC/h, 10N) |