Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
View larger
FormFutura EasyFil HIPS Filament - Red, 2.85 mm, 750 g
8718924471739
New product
EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.
See Description for more details about the product.
Don't delay, buy today. Add to cart now!
1 Item
Warning: Last items in stock!
- Write a review
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
More info
Description
EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives.
Unique features
- Very limited warping
- High impact resistance
- Extremely smooth matte surface finish
- Light-weight and durable
- High ESCR resistance
- Engineered to meet UL 94HB flame retardancy standards
- Easily to glue with various adhesives
- HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 220 - 260oC | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110oC | Fan speed: 0-30% | Experience level: Intermediate |
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.04 g/cc | 50 gr coil | 0.75 Kg spool |
| Ø 1.75mm | ± 20.0m | ± 300m |
| Ø 2.85mm | ± 7.5m | ± 113m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC
* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
| Properties | Typical value | Test Method | Test condition |
|---|---|---|---|
| Physical | |||
| Specific gravity | 1.04 g/cc | ISO 1183 | - |
| Melt flow rate | 3.4 cm3/10min | ISO 1133 | 220oC/5Kg |
| Water absorption | <0,1% | ISO 62 | Saturated at 23oC |
| Moisture absorption | <0,1% | ISO 62 | Equilibrium 23oC/50% RH |
| Mechanical | |||
| Impact strength | 15 KJ/m2 | ISO 179 | Charpy Notched @23oC (73oF) |
| Tensile strength | 22 Mpa | ISO 527 | Stress @ Yield 23oC |
| Tensile modulus | 1550 Mpa | ISO 527 | - |
| Elongation at break | 50% (MD) | - | - |
| Flexural strength | ± 51.2 Mpa | - | - |
| Flexural modulus | ± 2126 Mpa | - | - |
| Hardness | - | - | - |
| Thermal | |||
| Print temperature | ± 220 - 260oC | - | - |
| Melting temperature | ± 180 - 260oC | ISO 294 | - |
| Viscat softening temp. | ± 89oC | ASTM D1525 | B/2 (120oC/h, 50N) |