4 Brushless Motors 2206 Baby Beast V2 CW/CCW and 4 ESC AFRO 12 A - Pack

Description

The new Easy combo from MultiStar and Afro, matching the most popular combinations into one easy package.

The "Baby Beast" combo matches the legendary MultiStar 2206 V2 CW/CCW motors with the 12A V3 Afro ESCs for a perfect 220~300mm quadcopter power combo. No more guess work, no more waiting for stock of all the combo parts.

The Afro ESC boasts high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response, the Afro ESC series are set to change the expectations of multirotor pilots around the globe. The Afro ESC series are shipped with multirotor specific SimonK software preloaded, no need to reflash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.

The 2206-2150KV V2 MultiStar nicknamed the “Baby Beast”, is the monster motor for the small 250 class quadcopters! Designed for 5 or 6 inch props, this motor has power on tap, and ready for your fully loaded 250. The motor has been beefed up in all the right places for FPV durability, with 3.17mm center shaft, 11mm prop flange and a 5mm prop shaft, there is no need to worry about the occasional tree in the way. It’s fitted with shimmed and pre-loaded bearings and high grade silicon wires. If you’re looking for more power, durability and value for your sub-300mm multirotor, think…. MultiStar 2206 the Baby Beast 

MultiStar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.  

Features

• KV(RPM/V): 2150
• Lipo cells: 3~4s
• Max Power: 320w
• Max Amps: 18A
• Dimensions (Dia.xL): 27 x 17mm
• Motor Shaft: 3.17mm (5mm prop shaft)
• Prop shaft: 5mm 
• Weight: 30g
• Bolt hole spacing: 16mm * 19mm
• Connectors: 2mm bullet

Specs (Afro 12A ESC)

• Current Draw: 12A Continuous
• Voltage Range: 2-4s Lipoly
• BEC: 0.5A Linear 5.0v
• Input Freq: 1KHz
• Firmware: afro_nfet.hex
• Discharge wire/plugs: 20AWG/male 2mm
• Motor wire/plugs: 20AWG/female 2mm
• Weight: 10g (Included wire, plug, heat shrink)
• Size: 25 x 20 x 6mm 

Specifications

• Kv(rpm/v): 2150.00
• Resistance (mh): 102.00
• Power (W): 320.00
• Length B (mm): 17.00
• Can Length D(mm): 7.00
• Max Current (Motor) (A): 18.00
• Max Voltage (V): 16.00
• Shaft A(mm): 2.00
• Can Diameter C(mm): 28.00
• Total Length E(mm): 22.00

Don't delay. Buy today.

Add to cart now!