CBC-4 6V/12V Battery Auto Charger

Description

The charger is not only designed for high capacity battery batteries - due to different charging programs, it is also suitable for gel batteries, motorcycles, yachts, or scooter batteries with less memory.

It has a large, easy-to-read LCD display and a built-in voltmeter that lets you estimate the battery charge.

The charger is controlled by the microprocessor, and after full charging it is automatically turned off and returns to voltage control mode, being 100% safe for any battery.

The efficiency of the charger is comparable to the charging process in top professional devices (even a few times more expensive) - the use of the charger does not adversely affect battery operation, but rather increases operating time

Innovative solutions that are applied to the charging device:

• Automatic and safe battery charging control - in case of a certain voltage or automatic charging current reduction;
• Charging termination voltage monitoring - Auto charging resumption when battery voltage drops.
• "Winter" mode - ensures complete and efficient battery charge even below ambient temperature;
• Recharging / resuscitation mode - a special way of charging - in the case of extremely discharged batteries, the charger applies simple charge charging currents to obtain a safe voltage to allow faster charging, the charger decides on the need to use this mode ;
• The charger is equipped with a short-circuit protection set, reverse polarity, overtemperature, overload and overload.

The first phase - is measuring and inserting the read voltage at the battery terminals and determining the type of voltage. Press the "MODE" button, select the load mode. The next step is the main download - depending on load mode 0.8A / 3.8A.

At the final stage of charging, the current is limited to 0.8 A - it is an effective protection against the saturation phenomenon of the battery. 

When the voltage reaches 14.4 V / 14.7 V (for a 12 V battery) and 7.3 V (for 6 V batteries), the core charging is complete.

The last step is to monitor the battery voltage - if the battery is charging, if the voltage drops to 12.6V (12V) /6.3V, the battery charging device is activated to prevent additional battery discharge.

Characteristics

• Input voltage 220-240V AC 50Hz / 60Hz
• Accepted batteries 6V / 12V DC
• Battery capacity supported:
  • 1.2-120Ah at 12V
  • 1.2-14Ah at 6V
• Charging voltage:
  • 14.4 V / 14.7 V for 12V batteries
  • 7.3 for 6V batteries
• Load current 0.8 / 3.8 [A];
• Working temperature -10..40 ^oC (lower power at higher temperature)
• Dimensions 18.3 x 6.8 x 4.7 [cm]

Don't delay, buy today.

Add to cart now!